Electronic Circuit Diagrams



delabs Schematic Diagrams and Circuit Design Methods.

Battery Level Indicator

Battery level voltage measurement is best done with a dummy load. This circuit has four LEDs to show the charge left. It is important to avoid overcharge or deep discharge of rechargeable batteries. Never try recharging normal batteries. Using rechargeable batteries are good for the environment.

on: 7/11/2019


Sample and Hold with CD4066

A sample and hold is like an analog memory. If The digital control A is low 4066 switch is open, and when A is high switch is closed. U2B is a buffer so as to ensure quick charging of C1 thru 4066 on resistance of 100E. U2A is a FET input opamp buffer which does not load or drain the cap C1.

on: 6/14/2019