delabs Schematic Diagrams and Circuit Design Methods.
FM stereo demodulation is accomplished by the use of the LM1800 phase locked loop, thereby eliminating the need for external coils. The AM function of the receiver is done completely with the LM3820 AM radio system. While designed for 3 section tuned superheterodyne application.The LM382 dual preamplifier was selected for its minimum parts count and low noise capability.
on: 5/16/2022
circuit-design
The purpose of this application note is to describe the operation and potential pitfalls of a 10V resolution (VREF = 100mV) 4 1/2 digit autoranging scheme using the ICL7103A/ICL8052A pair. Two auto-ranging circuits are included within the text. Each is discussed in terms of its advantages and disadvantages.
on: 11/2/2021
test-measurement
This application note describes a technique for auto-ranging a battery operated DVM suitable for panel meter applications. Also, circuit ideas will be presented for conductance and resistance measurement, 9V battery and 5V supply operations, and current measurement.
on: 11/1/2021
test-measurement
The Atmel 8-bit AVR RISC-based microcontroller combines 32 KB ISP flash memory with read-while-write capabilities, 1 KB EEPROM, 2 KB SRAM, 23 general-purpose I/O lines, 32 general-purpose working registers, 3 flexible timer/counters with compare modes, internal and external interrupts, serial programmable USART, a byte-oriented 2-wire serial interface, SPI serial port, 6-channel 10-bit A/D converter...
on: 10/23/2021
embedded-systems
It is called analog dial timer as it has no digital display, but the chip is digital it is CD4541. It is Mains operated, you could make on-delay or off-delay. By changing the caps and resistors or with even dip-switches you could get timing of few seconds to many hours.
on: 7/12/2019
digital-design